DGT Smart Board instruction questions

I bought one of the non- bluetooth DGT Smart Boards.  The instructions are terrible and, while I feel like I have found excellent YouTube videos to instruct me on every aspect of fixing my house, I cannot find one good video giving any sort of depth of how to set up the DGT smart board to 1) play and 2) broadcast a game.  Can anyone help me with:

1)  Can anyone direct me to any videos that give good in-depth instructions on how to use the numerous features (not one of the numerous "unboxing" videos that are useless

2)  I installed Fritz14 and all the DGT software to my computer.  When I attached the USB to my computer and then the connection to the board, nothing seems to happen.  When I start "DGT Board Tester" and then press Connect, nothing happens.  When I go into the DGT Rabbit PlugIn, and press Connection, it states "No board found".  Can anyone give me some ideas about what I can do to get the board to be recognized

Thanks

Do you have checked the USB cable?

When you have everything hooked up and it says no.No i'm plugged from the computer and then plug it back up

"When I attached the USB to my computer and then the connection to the board, nothing seems to happen. When I start "DGT Board Tester" and then press Connect, nothing happens. When I go into the DGT Rabbit PlugIn, and press Connection, it states "No board found". Can anyone give me some ideas about what I can do to get the board to be recognized"

Hi, some help in a random order:
- When you launch the DGT Rabbit Plugin and choose to connect, pay attention to the fact that there is a drop-down menu, by which you select the (serial) port that you want to connect thru. Better said: you select a COM port, and "test" it, to see if the DGT is connected to that board. If no DGT is found, than the connection is not established, and you get a red "No board found" alert. In this case, you select a different COM port, until you find it, the alert becomes green and you're all set.
- In ChessBase programs, under "Board", there is a checkbox named "use DGT board". You need to check it, to use the DGT connected to Fritz.
Hope this helps.
AG